ReCycle. Still the absolute don for sample cutting?

After writing the Reason Free post, I was winding up the day when I suddenly caught a glimpse of ReCycle.
A bit of software that’s been in my heart since I first came across it in the early ’90s.
Reason Studios had only gone and brought it up to date to work on a modern OS, and it was free too.
It was late, but I had to grab it and see if it was still the same.
I’d lost my licence somewhere along the way. Maybe in the early 2000s when Ableton came about and I thought I didn’t need it anymore.
I’d even bought an academic version later, thinking I could somehow get it running. No success.
So I was really pleased I could actually have a working copy again.
I downloaded it and instantly chose a sample to start cutting up.
What started as a quick revisit turned into hours of cutting, listening and testing different methods in Logic and Ableton – then building and testing a browser converter to take the processed RX2 slices into both.
An old favourite, back in working order
Everything was just as I remembered.
Even though I hadn’t touched it for 20 years, it all came flooding back.
For me, this was still the absolute don for sample cutting.
There are plenty of modern ways to get samples in time with your track.
Simple warping can do the job quickly and easily.
There are other ways to slice a loop and work on the individual sounds.
Ableton’s “Slice to New MIDI Track” lets you divide a loop into slices, each sitting in its own Simpler inside a Drum Rack, so you can work on them separately.
Over the years, that’s been the closest I’ve come to the way I used to work in ReCycle.
It works, and there’s plenty you can do with it.
But coming back to ReCycle, what stands out to me is the tone and timbre of the individual sounds once they’re cut.
Slowing the loop down makes those differences easier to hear.
What happens when you slow a loop down?
Say your sampled loop is at 127 BPM and your track is at 122.
When you spread the slices out to follow that slower tempo, each sound has longer to wait before the next one starts.
Unless its tail reaches far enough, you get a gap.
Going faster is generally easier in that respect.
Take a loop from 115 BPM to 120 BPM and the slices trigger closer together.
Depending on how you play them back, their tails can overlap or get cut off.
You’ve already got enough sound to fill the space.
Going slower, you’ve got space to fill.
Filling the gaps with Stretch
That’s where ReCycle is king for me.
Its Stretch control extends the tail of each slice, adding extra audio from that slice to fill the gap before the next one.
With the slices in the right places, it can be remarkably smooth.
To my ears, the individual sounds keep a solidity and character that I really like – as the whole sound isn't getting stretched.
The slice points are the key
I don't just accept the automatic markers and leave it there.
I audition the first slice and listen for the point where the sound changes.
A new note, another hit, a noticeable change in tone.
If that next sound is still inside the same slice, I put another slice point there.
Then I work through the rest of the loop in the same way.
I want each slice to contain the sound I intend to extend, without hearing the beginning of the next sound in its tail.
That bit of listening and checking makes all the difference.
Something else I’m appreciating about ReCycle is how much control you have before you even export.
Some of the decisions might be better made once the loop is playing alongside the rest of the track. But being able to shape the sound while I’m cutting it really helps.
I can hear how the individual slices respond as I work, and get the loop feeling how I want it before taking it into the DAW.
Here’s how I work through the loop, check the cuts and bring in Stretch.
I’ve used this beyond drum loops too, including sampled music loops.
I wouldn’t expect every loop to behave perfectly, but getting those cuts right is always where I start.
Once the MIDI file is in the DAW and the samples are playing in the sampler, a few adjustments can get the loop tight to the groove.
Tuning the individual slices
You can tune the individual slices in your sampler too.
That opens up another side of it: changing the tuning of a sound in a loop while keeping the timing where you want it.
If a conga or tom is out of tune, it’s simple to tune that slice.
I’ve had really solid results this way, without that degraded sound you can get when pitching a whole loop.
Building your own sample collection
It’s also a great way to build your own sample collection.
Once you’ve cut a loop, those individual sounds are there to use in your productions.
You might only want the snare, a tom or a small piece of percussion.
You can take that sound, tune it and shape it in your sampler, then build something completely different around it.
That’s another reason the quality of each cut matters.
I want the individual sounds to hold up on their own, wherever I use them next.
What about Logic and Ableton?
Both have ways of slicing a loop and working on the individual sounds, so I wanted to give them a proper go before saying how they compare.
For the comparisons, I took a loop originally at around 127 BPM down to 106 BPM.
In Ableton, I tried several Warp modes, then went further with looping and crossfading the tails of the individual slices.
Some settings worked well on particular hits, but across the sounds I compared, I still preferred the sound from ReCycle.
Logic got closer. Flex Time’s gap filling and rhythmic looping gave useful results, although I could still hear the processing on the snare.
Then I tried Logic’s Quick Sampler in Slice mode, with Flex and Follow Tempo enabled. That sounded really good – the closest to ReCycle out of all the tests. The difference was more subtle.
Quick Sampler gave me a result I’d be happy using in a production, but with this loop, the tone and timbre of the individual sounds still held up better in ReCycle for me.
That’s alongside the control ReCycle gives me while placing the cuts and shaping the loop before exporting.
For the way I like to work, there’s still a practical reason to keep coming back to it.
Hear the difference
Here’s the original loop, followed by the examples at 106 BPM.
Listen to the body and decay of each sound, as well as the gaps between them. The snare is a good place to focus.
Have a listen and see what you think.
The examples have been level matched, with one second of silence between each version.
The ReCycle version (77% Stretch) is the last one in each set.
Original Loop
106 BPM Ableton Warp Methods Comparison
Starts at | Version |
0:00.00 | Beats – Back-and-Forth |
0:05.53 | Beats – Forward |
0:11.06 | Tones |
0:16.58 | Texture |
0:22.11 | Complex |
0:27.64 | Complex Pro |
0:33.17 | ReCycle – Stretch 77% |
Ableton slice-tail looping at 106 BPM
Starts at | Version |
0:00.00 | Uniform loop settings across the slices |
0:05.53 | Loop points and crossfades selected individually |
0:11.06 | ReCycle – Stretch 77% |
Logic Quick Sampler at 106 BPM
Starts at | Version |
0:00.00 | Slice mode – Flex off |
0:05.53 | Slice mode – Flex and Follow Tempo on |
0:11.06 | ReCycle – Stretch 77% |
RX2 converter for Logic Sampler and Ableton Drum Rack
Getting the loop right in ReCycle is one part of the process.
I also wanted a straightforward way to take those slices into the sampler I’m actually using in a production.
So I built a browser converter for RX2 files.
It creates a package for either Logic Sampler or an Ableton Drum Rack, with the samples mapped to individual notes and a matching MIDI file.
The current version reconstructs saved Stretch, Attack, Decay, gain, pitch changes within ±12 semitones, EQ and transient/compressor processing into the exported WAVs.
It supports 16-bit and 24-bit mono or stereo RX2 files at 44.1 or 48 kHz.
It’s an independent converter, tested against ReCycle’s own exports. It flags unsupported files or settings before converting.
I’ve tested the packages in Logic and Ableton, including the slice mapping and MIDI.
Loading your converted loop
Choose Download Logic Package or Download Ableton Package, then unzip the download.
Move the whole unzipped folder into your music project folder before loading the instrument. Keep the instrument and its Samples folder together.
In my Ableton test, moving the complete folder out of Downloads resolved the missing samples.
For Logic, load the .exs instrument in Sampler, then drag the included MIDI file into the arrangement on that same instrument track.
For Ableton, drag the .adg onto a MIDI track, then drag the included MIDI file into Arrangement View on that same track.
The MIDI notes trigger the slices in their original sequence. Set your project tempo and play the MIDI region to hear the loop.
Each pad contains a slice in Simpler, with the rendered tail included and Warp switched off.
Once it’s loaded in Ableton, use Collect All and Save to keep the samples with your project.
Then you can get on with the production: move the notes, adjust individual sounds, tune that conga, or change the groove.
More than a bit of nostalgia
Finding ReCycle again definitely brought back some memories.
But after cutting a loop, hearing the results and getting them into my DAWs, I remembered why I rated it so highly.
These days, you can drop a loop into a DAW and have it playing in time almost instantly.
Going through it slice by slice might feel long and tedious by comparison.But for me, the effort is worth it.
It’s the tone and timbre of each individual sound – keeping the body and character that made me want to sample it in the first place.
That’s the difference I kept hearing in these tests.
And that’s why I’ll keep using ReCycle.




Comments